Music power (IHF) ..........................56W (4 Ω) 46W (8 Ω)

Effective output (IHF)...................... 21W/21W (4 Ω)  17W/17W (8 Ω)

(strain 0.2%)................................ 6Hz - 30kHz, -3dB

Frequency characteristic............... 6Hz - 130kHz, +0 -3dB

Distortion factor (at the time of effective output)............ 0.2% or less

Cross modulation distortion factor....... (60Hz: 7kHz = 4: 1, at the time of effective output) 0.2% or less

Signal-noise ratio (IHF) Above.................. 110dB

Damping factor........................................ 50 (at the time of 8 Ω

load) Input sensitivity/impedance............... 600mV/50k Ω

Load impedance....................................... 4 Ω - 16 Ω

                      Pre-amp section 

               Input sensitivity/impedance

 Phono Low: ..............................................3mV/50k Ω
Phono High:............................................... 5mV/50k Ω
Tuner: .......................................................200mV/60k Ω
AUX1, 2:................................................... 200mV/60k Ω
MIC:......................................................... 3mV/50k Ω

Tape monitor 1 and 2 Rec Out (output):........... 200mV
Playback (input):.......................................... 200mV/60k Ω
Rec/Play (DIN):......................... (Input) 200mV/60k Ω, (output) 30mV/80k Ω .

Output voltage/impedance Rated output:................. 600mV/500 Ω
Installed capacity: ..................................1.5V/500 Ω

Phono allowance input Low:..................... 130mV
High: 260mV

Total height harmonic wave distortion factor............ 0.2% or less

Signal-noise ratio (IHF) Phono:.................. 76dB
Tuner:..................................................... 86dB
AUX 1, 2:................................................. 86dB

           Frequency characteristic

Phono: ...........Within deviation ±1dB from RIAA standard curve
Tuner and AUX1, 2:............... 8Hz - 80kHz, +0 -3dB
MIC:.................................... 30Hz - 6kHz, +0 -3dB

                 Tone control

Bass: .................................100Hz, +9dB - -9dB
Treble: ..................................10kHz, +9dB - -9dB

 Loudness control (Volume -30dB) 100Hz, +9dB

                    Synthesis  

Use semiconductor

Transistor:.............................................. 40
Diode: ....................................................12

Power source AC.....................................100V and 50/60Hz

                   AC outlet

Switched:............................................... 1 system
Unswitched:............................................ 1 system

Electric power consumption..................... 55W

External size........................................... Width 410× height 140× depth 300mm

Weight ....................................................8kg