POWER AMPLIFIER SECTION |
Power Output |
200 watts* per channel.
minimum RMS both |
channels driven, at 8
ohms from 20 to 20,000 |
Hz with no more than
0.02% total harmonic |
distortion. |
Both Channels Driven |
into 8ohm at 1.000 Hz.............210W
* 210W |
into 4ohm at 1.000 Hz............250W
- 260W |
Dvnamic Powet Output..........600W
at 8 ohm |
Total Harmonic Distortion |
(20 Hz lo 20,000 Hz from
AUXI |
rated power into 8ohm.............0.02% |
1W power into 8ohm..............0.007% |
Intermoduration
Distortion |
160 Hz :7 kHz = 4:1 SMPTEI |
rated power into 8ohm...........0.0045% |
1W power into 8
ohm............... 0006% |
Slew Rate
..........................±110V/»sec |
Rise Time............................0.95
«sec |
Frequency Response.............
DC to 280.000 Hz-3 dB |
Signal to Noise Ratio |
(A weighted).........................
115 dB Damping Factor.......120
to 20 kHz at 81!) ...... 50 |
Input
Sensitivity. Impedance . 1V/50 kohm |
PRE AMPLIFIER SECTION |
Input Sensitivity Impedance |
PHONO 1.2
.................. 2 5 mV/50 kohm |
AUX and TAPE...................200
mV/5O kohm |
MIC
........................... 2.2 mV/60 kH |
Signal to Noise Ratio (A weighted) |
PHONO 1. 2.......................85
dB for 2 5 mV input |
91 dB for 5.0 mV input |
AUX and TAPE.................
110 dB lor 200 mV input |
MIC
............................74 d8 (or 2.2 mV input |
Maximum Input Level |
at 1.000 Hz.....................260
mVIRMSI. T H D. 0.02% |
Frequency Response |
PHONO RIAA |
Standard Curve..................20
Hz to 20.000 Hz ±0 2 dB |
AUX and TAPE....................5
Hz to 210.000 Hz - 3 dB |
Tone Control |
Bass...................................±12
dB at 100 Hz |
(50 Hz Boost)
..............110 dB at 50 Hz |
Mid.................................±10
dB at 800 Hz |
Trabla...........................±12
dB at 10 kHz |
Loudness Control |
(VOL. -30 dB' 1 +8 dB at
100 Hz |
i +5 dB at 100 Hz |
Subsonic Filta.
........18 Hz 6 dB/oct |
High Filter .......7
kHz 6 dB/oct |
Output Level/lmpedance |
TAPE REC Out 'Pin....
200 mV/300B |
TAPE REC Out (DIN) 30
mV/80 kD |
PRE Out..............................l.0
V/1 kohm |